I too am currently on the top rack! Which made me even more confused where the stuff on my boat came from... I got a quote from Blue Creek today, $30 per month cheaper.. Doubt I will leave, but I have a feeling they may take a little better care since they are a Cobalt dealer.. But who knows. I am emailing Lee now to check on the leak.DJBlaylock01 wrote: Thu Mar 14, 2019 2:38 pmGlad I am not the only one that has been having this conversation with them! Drives me nuts when they leave dirty shoe prints on the seats getting in and out of a boat with a walk through transom!! Had a problem last year with a leak in the roof of the dry storage (mine was on top rack). Took a daily grip session of about 2 weeks for them to fix it. Left rust colored stain on my back pad. I feel your pain!Dropped Anchor wrote: Thu Mar 14, 2019 2:24 pmI spoke with Lee today in person. I told them they are going to have to do a better job when the new boat comes in. I am so sick and tired of seeing a black shoe foot print on the seats and they just rip the cover off in some half assed manner etc. The guys just sometimes don’t think or give a damn. When I called to have them summerize the boat, they took the cover off, summerized the boat, then put it back on the rack. Ask me if they put the cover back on. NOPE, then I get to the boat today and it has some oil or grease that dripped on it from the boat above. ARGH!!! If I gave it to them with the cover on it, why not put it back on? He said they will do better.DJBlaylock01 wrote: Thu Mar 14, 2019 9:16 am
I keep mine at Harbor point also. Talk to lee about my old spot that I had my 220 in. It fit with tower up no problem. Had to get a new spot for the R5. Its is delivering there on Friday. Been waiting on stereo upgrade at Blue Creek but with the construction going on there they have not had a chance to work on it. Made 1st boat payment and have not even set foot on it yet! Driving me crazy!!
Hello from Alabama
-
- Captain
- Posts: 200
- Joined: Mon Mar 11, 2019 11:13 pm
- Location: Alabama
- Contact:
Re: Hello from Alabama
2019 CS22
240 DP
Lake Martin, AL
240 DP
Lake Martin, AL
Re: Hello from Alabama
Interesting reading about rack storage. I would imagine the porter who is possibly a $7.25 per hour kid may not have developed his “ Give a $hit” behavior yet.
Are you allowed to watch the process of them putting it away? Drain plug.. covers? Can you leave the boat ready to be stored? Just curious
Are you allowed to watch the process of them putting it away? Drain plug.. covers? Can you leave the boat ready to be stored? Just curious
2008 272 , 496 HO fo SHO
California Delta
Table Rock Lake
#FARCON
California Delta
Table Rock Lake
#FARCON
-
- Commander
- Posts: 61
- Joined: Sat Apr 14, 2018 11:14 am
- Location: Lake Martin, Alabama
- Contact:
Re: Hello from Alabama
They don't let you in to see them put it away. I usually leave it ready for storage. Battery cut off, cover snapped on, but I have seen them open up other boats to verify the battery is cut off before pulling out of the water. I plan on making a tag that I can hang on the back of the transom to let them know its off so they can just put it away without opening back up.cmattj wrote: Thu Mar 14, 2019 2:57 pm Interesting reading about rack storage. I would imagine the porter who is possibly a $7.25 per hour kid may not have developed his “ Give a $hit” behavior yet.
Are you allowed to watch the process of them putting it away? Drain plug.. covers? Can you leave the boat ready to be stored? Just curious
2019 R5
V8-300CE-G EVC DP - 300 hp
Lake Martin, Alabama
V8-300CE-G EVC DP - 300 hp
Lake Martin, Alabama
Re: Hello from Alabama
I would explode if I found my boat like that. I'm afraid I would turn into a total Richard, and everyone there would k ow me by first name. Minimum wage or attitude or whatever... You don't treat a customers boat like that.
2001 262 502 GXI (because it sounds better than an 8.2)
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
Re: Hello from Alabama
+1. I my have OCD, but it is my OCD.Ytmsn wrote: Fri Mar 15, 2019 3:53 am I would explode if I found my boat like that. I'm afraid I would turn into a total Richard, and everyone there would k ow me by first name. Minimum wage or attitude or whatever... You don't treat a customers boat like that.
2011 242 Volvo Penta 8.1 Gi
"DIGGIN' IT"
"DIGGIN' IT"
-
- Captain
- Posts: 200
- Joined: Mon Mar 11, 2019 11:13 pm
- Location: Alabama
- Contact:
Re: Hello from Alabama
When are you taking her out on the water?WarEagle2003 wrote: Mon Mar 11, 2019 1:37 pm Hello everyone. My name is Stirling and I am from Birmingham, AL. We are very excited to take delivery of our first boat, a 2019 R5. My wife and I have been Cobalt fans for some time. We are both excited, and a little nervous at the same time. Looking forward to joining the Cobalt community online and learning from much more seasoned boaters. Here is a picture of our boat.
2019 CS22
240 DP
Lake Martin, AL
240 DP
Lake Martin, AL
-
- Captain
- Posts: 490
- Joined: Wed Apr 19, 2017 9:30 am
- Location: KY
- Contact:
Re: Hello from Alabama
Wow, never thought about being under another boat! Always good to hear other’s experiences. Good luck on getting your problems solved.
Dub
Dub
2017 220S (280 HP Volvo duoprop)
Live in Shepherdsville, KY
Boat at Laurel Lake (London, KY)
Live in Shepherdsville, KY
Boat at Laurel Lake (London, KY)
-
- Lieutenant
- Posts: 41
- Joined: Mon Mar 11, 2019 1:28 pm
- Location: Birmingham, AL
- Contact:
Re: Hello from Alabama
We are having a few things done currently. The boat had not been buffed/polished yet since it had only been at the dealership a couple days before we bought it. They are having to buff and even wet sand a few minor scratches that were on the boat with delivery, something I was honestly surprised by. You’d think Cobalt would make sure it was perfect before leaving the factory. Also they installed transom speakers and my car guy is doing a detailed polish followed by ceramic coating. Just due to scheduling, we’ll be getting it to the Ridge Marina on April 15th.Dropped Anchor wrote: Sun Mar 24, 2019 9:52 amWhen are you taking her out on the water?WarEagle2003 wrote: Mon Mar 11, 2019 1:37 pm Hello everyone. My name is Stirling and I am from Birmingham, AL. We are very excited to take delivery of our first boat, a 2019 R5. My wife and I have been Cobalt fans for some time. We are both excited, and a little nervous at the same time. Looking forward to joining the Cobalt community online and learning from much more seasoned boaters. Here is a picture of our boat.
2019 R5 VP300
Re: Hello from Alabama
You're boat looks amazing. congrats from Ohio and i am jealous.
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
-
- Captain
- Posts: 200
- Joined: Mon Mar 11, 2019 11:13 pm
- Location: Alabama
- Contact:
Re: Hello from Alabama
Awesome! Yes I learned about this as well. I finalized all my paperwork last week. Still no boat. So crazy. I have never even seen the boat yet, but it is insured under my name and I have purchased it. Ha! Seems pretty much opposite from everything else I have purchased. They told me as well they have detail it etc when it arrives. The anticipation is killing me. I have been looking up videos on how to install the mooring cover and open the Bimini top on the tower. Purchased some sentry fenders from Mission and some Cobalt fender covers for my regular fenders. I am just ready for it now.WarEagle2003 wrote: Thu Mar 28, 2019 7:27 amWe are having a few things done currently. The boat had not been buffed/polished yet since it had only been at the dealership a couple days before we bought it. They are having to buff and even wet sand a few minor scratches that were on the boat with delivery, something I was honestly surprised by. You’d think Cobalt would make sure it was perfect before leaving the factory. Also they installed transom speakers and my car guy is doing a detailed polish followed by ceramic coating. Just due to scheduling, we’ll be getting it to the Ridge Marina on April 15th.Dropped Anchor wrote: Sun Mar 24, 2019 9:52 amWarEagle2003 wrote: Mon Mar 11, 2019 1:37 pm Hello everyone. My name is Stirling and I am from Birmingham, AL. We are very excited to take delivery of our first boat, a 2019 R5. My wife and I have been Cobalt fans for some time. We are both excited, and a little nervous at the same time. Looking forward to joining the Cobalt community online and learning from much more seasoned boaters. Here is a picture of our boat.
When are you taking her out on the water?
2019 CS22
240 DP
Lake Martin, AL
240 DP
Lake Martin, AL
Re: Hello from Alabama
Dropped Anchor wrote: Sat Mar 30, 2019 6:42 pmAwesome! Yes I learned about this as well. I finalized all my paperwork last week. Still no boat. So crazy. I have never even seen the boat yet, but it is insured under my name and I have purchased it. Ha! Seems pretty much opposite from everything else I have purchased. They told me as well they have detail it etc when it arrives. The anticipation is killing me. I have been looking up videos on how to install the mooring cover and open the Bimini top on the tower. Purchased some sentry fenders from Mission and some Cobalt fender covers for my regular fenders. I am just ready for it now.WarEagle2003 wrote: Thu Mar 28, 2019 7:27 amWe are having a few things done currently. The boat had not been buffed/polished yet since it had only been at the dealership a couple days before we bought it. They are having to buff and even wet sand a few minor scratches that were on the boat with delivery, something I was honestly surprised by. You’d think Cobalt would make sure it was perfect before leaving the factory. Also they installed transom speakers and my car guy is doing a detailed polish followed by ceramic coating. Just due to scheduling, we’ll be getting it to the Ridge Marina on April 15th.
2016 R7 VP 380
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
2014 220S Merc 5.0L (sold)
Columbus, OH
Chautauqua, NY
Re: Hello from Alabama
Not much to add, but welcome to the group. And I truly applaud all the thread hijacking that went on here. That was great to see. You all will fit in nicely.
2010 Cobalt 232 8.1Gi
Re: Hello from Alabama
.JTinMO wrote: Tue Apr 02, 2019 1:23 pm Not much to add, but welcome to the group. And I truly applaud all the thread hijacking that went on here. That was great to see. You all will fit in nicely.
Took me a little bit to get used to it to JTMO....then I was assimilated.

.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Re: Hello from Alabama
Wait.. what's a wardammeagle? 
2001 262 502 GXI (because it sounds better than an 8.2)
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
Re: Hello from Alabama
Welcome from Guntersville Lake, '15 R5, sandstone with black accent stripe. Enjoy that mighty fine boat; she'll purr like a kitten. Nothing like a Cobalt.
2020 R5 "House Without A Key"
Cobalt blue, white accent stripe, sandstone bottom
Cobalt blue, white accent stripe, sandstone bottom
Who is online
Users browsing this forum: No registered users and 1 guest