Umbrella for R series

[Tuscany]

.
That’s genius YT! First of a kind on a 260 series. Never seen that before.
Nice job my friend

Btw, it’s funny how I want cockpit heat and full sun in our 263 & you’re looking for more shade. Erie boating vs Oklahoma boating...so similar yet so different!

In any event, patent that umbrella.
Cya on Shark Tank.

.
.

Ain’t that the truth A7. On our last boat that we owned since 2002, we never once opened the Bimini. We (my family, not me).wanted to soak it ALL up.

[Tuscany]

Nice job YT. That everything you can ask for!

[Ytmsn]

.
That’s genius YT! First of a kind on a 260 series. Never seen that before.
Nice job my friend

Btw, it’s funny how I want cockpit heat and full sun in our 263 & you’re looking for more shade. Erie boating vs Oklahoma boating...so similar yet so different!

In any event, patent that umbrella.
Cya on Shark Tank.

.
.

Ain’t that the truth A7. On our last boat that we owned since 2002, we never once opened the Bimini. We (my family, not me).wanted to soak it ALL up.

Earlier in the year we never opened the bimini when the temps were in the 60s or 70s or low 80s. At those temps I figured that's what it would be like up where yall are. But here in the mid 90s and sometimes triple digits, shade is nice. I dont worry about it much, especially if I'm up to my ears in the water. But missus yt and the grandbabies need it!

And the water temps? In Missouri there is a river that runs through Branson Callled Tanycomo. It comes off the bottom of TRL where there are lots of places over 200' deep. That water is COLD. Mid 50s. I put my feet is it and about wet my pants. I dont see how you guys up north could ever get in that cold water. You guys are tuff..

[Tuscany]

YT, Lake Eire is somewhat shallow. I think the max depth is slightly over 200’. By mid summer, it’s pretty warm. Maybe it’s all of the chemicals Detroit dumps in, I don’t know

[gdane]

Well, it's not an R series, but it's an umbrella! I finished it up tonight right before it got dark. I'm going to try it out this weekend and see how it works. I can't imagine Cobalt charging what they charge for something like this. Granted, the umbrella is a cheapie but I can buy a bunch of them if need be. It's a 9' that cranks up and tilts just like the big boys. I put a 2" stainless tube in the ski pylon hole, and boom! Rear shade.
20180612_204947.jpg20180612_204822.jpg

Sweet YT now we need to get my shop to screen print the the Cobalt Logo on the umbrella. Prolly not worth the shipping expense??? Oh by the way loce the red umbrella!!

[Alaskabound]

Yt, I’m assuming yours is made out of Obtanium

[tbully]

Quick update: The pylon on my R7 fits very snug. I didn’t measure the bolt because it doesn’t screw in to my 2017 for some reason. The ski pylon works fine and the bolts look nearly identical. There must be a slight difference. I won’t make a big deal about it until the 2019 gets here

Now the next big problem: While it looks like the umbrella should tilt, I can’t figure out how. Will be bummed if it can’t move.

[Ytmsn]

Tbully when you get it deployed please measure the height from the deck to the underside. I'm trying to determine how high it should be while standing underneath.

Gdane I'm not worried about a logo but thanks for the offer!

Alaska what I did is very obtainable!. It's a piece of 2" SS tubing and a $30 umbrella from Walmarket. I cut about 8" off the umbrella shaft to get the right height (for me anyway), and I have a machinist buddy that is going to cut each end of my tubing to clean it up, then he'll machine the same notch that my ski pylon has, and polish it. He's also going to weld a shim on each end so the umbrella shaft will fit tight.

[Big Block Power]

Tbully when you get it deployed please measure the height from the deck to the underside. I'm trying to determine how high it should be while standing.

Alaska what I did is very obtainable!. It's a piece of 2" SS tubing and a $30 umbrella from Walmarket. I cut about 8" off the umbrella shaft to get the right height (for me anyways)

So you just bought a normal rain umbrella. No need to cut that. Lol

[tbully]

Tbully when you get it deployed please measure the height from the deck to the underside. I'm trying to determine how high it should be while standing underneath.

Gdane I'm not worried about a logo but thanks for the offer!

Alaska what I did is very obtainable!. It's a piece of 2" SS tubing and a $30 umbrella from Walmarket. I cut about 8" off the umbrella shaft to get the right height (for me anyway), and I have a machinist buddy that is going to cut each end of my tubing to clean it up, then he'll machine the same notch that my ski pylon has, and polish it. He's also going to weld a shim on each end so the umbrella shaft will fit tight.

I'm about 5' 10" and easily walk under it. I will get a measurement the next time I have it out.

[Ytmsn]

Tbully when you get it deployed please measure the height from the deck to the underside. I'm trying to determine how high it should be while standing underneath.

Gdane I'm not worried about a logo but thanks for the offer!

Alaska what I did is very obtainable!. It's a piece of 2" SS tubing and a $30 umbrella from Walmarket. I cut about 8" off the umbrella shaft to get the right height (for me anyway), and I have a machinist buddy that is going to cut each end of my tubing to clean it up, then he'll machine the same notch that my ski pylon has, and polish it. He's also going to weld a shim on each end so the umbrella shaft will fit tight.

I'm about 5' 10" and easily walk under it. I will get a measurement the next time I have it out.

That would be great. I'm guessing it's about 6'

[tgrace98]

.
That’s genius YT! First of a kind on a 260 series. Never seen that before.
Nice job my friend

Btw, it’s funny how I want cockpit heat and full sun in our 263 & you’re looking for more shade. Erie boating vs Oklahoma boating...so similar yet so different!

In any event, patent that umbrella.
Cya on Shark Tank.

.
.

Ain’t that the truth A7. On our last boat that we owned since 2002, we never once opened the Bimini. We (my family, not me).wanted to soak it ALL up.

And the water temps? In Missouri there is a river that runs through Branson Callled Tanycomo. It comes off the bottom of TRL where there are lots of places over 200' deep. That water is COLD. Mid 50s. I put my feet is it and about wet my pants. I dont see how you guys up north could ever get in that cold water. You guys are tuff..

The river you are referring too is actually Lake Taneycomo. and yes it is fed from the bottom of table rock which is in the upwards of 8-900ft deep at the dam. People love to Scuba dive near the dam of Table Rock where people say you can see 200-300lb catfish near the bottom

[trs23]

Very nice!

Would definitely like to have one of these adapters for my A25!

[Ytmsn]

Tbully when you get it deployed please measure the height from the deck to the underside. I'm trying to determine how high it should be while standing.

Alaska what I did is very obtainable!. It's a piece of 2" SS tubing and a $30 umbrella from Walmarket. I cut about 8" off the umbrella shaft to get the right height (for me anyways)

So you just bought a normal rain umbrella. No need to cut that. Lol

Ha! Sayz the guy that's 5 foot nothing!

[mtwbldr]

Would love one of these!! I saw one mounted on an R7 at the boat show this past week. Dealer selling for $900. They were more interested in making a deal on the R30 I was drooling over rather than take a few hundred off an overpriced umbrella and bracket. My wife is now begging for 1