2005 263 cobalt filler cushions
Posted: Thu Feb 05, 2026 3:25 pm
can anyone tell me what I need and how to install the filler cushions in the cabin on a 2005 263 cobalt?
.
So glad you found us sp1.
You will need six things for the 263 cuddy filler cushions.
The triangle fiberglass table (circled in blue highlight below). This may also be stored in a grey bag circled below. The table will rest on horizontal poles inserted into black plastic rod holder clips on either side of the horizontal wall of the bench. (circled in blue).
Three horizontal aluminum poles support the table and rear end of the cushions. Again, these poles are inserted into the black plastic pole holders (circled in blue highlights below) on each side of the seat edges. Normally these poles are stored in the cedar chest closet with clips that hold them ( I circled one of them in the cedar closet below).
The triangle cushions that are placed on top of the table and rear cross pole are the seat backrests; one on each side of the bulkhead wall on the port and starboard side of the cuddy cabin (circled in blue highlights).
These all form to make a bed in the last pic.
Anyways, I hope this helps.
And welcome aboard mate.
.
.
.
.
.
.
.
.
.