Page 1 of 1

ISO: low pressure water fittings

Posted: Sat Apr 27, 2024 2:10 pm
by RobL
I’m running out of ideas to identify and replace the parts from the picture. Taken from my 2014 R5, pics show 3/8” fitting leading from pump to our head. I want to install a “T” with similar fittings to add a transom shower.

Tried: West Marine, Home Depot, local plumbing outlets, and even RV stores

Re: ISO: low pressure water fittings

Posted: Sat Apr 27, 2024 3:37 pm
by jwill323

Re: ISO: low pressure water fittings

Posted: Sat Apr 27, 2024 4:55 pm
by Titaniumboy
Your fitting looks similar to the bag of elbows and swivel elbows I was sent with my freshwater tank kit. My fittings have a “THC” embossed on the fitting nut. THC at one time made Flair-It PEX fittings, but Flair-It is now a part of ESCO Elkhart Supply Company.

https://www.escousa.net/

https://www.flairit.com/

https://www.flairit.com/public/frontend ... 062223.pdf. PDF pages 10 thru 15

31927114-2C7A-4A69-BCEF-7E1FD807F389.jpeg

Re: ISO: low pressure water fittings

Posted: Sat Apr 27, 2024 5:39 pm
by billk2632
viewtopic.php?p=114581#p114581

Here is a link to to my thread. I did the same thing with my R5. Installed a T in the water line going to the head. I went to Lowe’s and bought some of the plastic tubing and used the Shark Bite fittings and bought the shower from Scandvik. Happy with how it turned out.

Re: ISO: low pressure water fittings

Posted: Sun Apr 28, 2024 8:17 am
by Kate
In cases like that, I've replaced the tubing with Pex and used SharkBite fittings.