I have a 1983 Cobalt 18 DV that I bought last fall.
I have a slow leak coming in somewhere towards back of boat.
When it sits overnight , the water can get kind of high
I’m thinking I can stick the bilge pump back there and that might solve it
Otherwise I think it might be the rubber boot around the engine
Any ideas would be appreciated
Slow leak in boat
-
andymoler58
- Lieutenant

- Posts: 37
- Joined: Wed Jan 22, 2020 8:23 pm
- Contact:
- AsLan7
- Fleet Admiral

- Posts: 11454
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Been thanked: 1 time
- Contact:
Re: Slow leak in boat
.
When was the last time you replaced or had your bellows inspected? There are two or three of them depending on your outdrive configuration.
.
When was the last time you replaced or had your bellows inspected? There are two or three of them depending on your outdrive configuration.
.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
Re: Slow leak in boat
Ditto, Aslan7. Its ages and cracks, and then leaks, its rubber like a accordion. Its not going away and you can't solve it w/ a bilge pump (bad practice anyway) because the crack get bigger the more its worked (steer).
Suggest you find a somebody who works on your brand of out-drive and schedule appointment. You also have a bearing in there that needs inspection. It may be the reason the boat was sold. It can be costly for a 83 boat.
Suggest you find a somebody who works on your brand of out-drive and schedule appointment. You also have a bearing in there that needs inspection. It may be the reason the boat was sold. It can be costly for a 83 boat.
2004 220
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Slow leak in boat
I've seen boats go blub blub blub from your description. The guys are probably correct with what you have going on.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
-
andymoler58
- Lieutenant

- Posts: 37
- Joined: Wed Jan 22, 2020 8:23 pm
- Contact:
Re: Slow leak in boat
I checked the records and it looks like the bellows were replaced in 2020, s
What kind of bearing is in there? Could that be where the leak is coming from? What about the boot that goes around the out drive?
Could that be the issue?
What kind of bearing is in there? Could that be where the leak is coming from? What about the boot that goes around the out drive?
Could that be the issue?
Re: Slow leak in boat
Shouldn’t be bad after 2 years, but you need to pull it out of the water and get them inspected. If they’re leaking you’re at best risking your u-joints and transom, and at worst sinking your boat.andymoler58 wrote: Tue Jun 21, 2022 11:27 pm I checked the records and it looks like the bellows were replaced in 2020, s
What kind of bearing is in there? Could that be where the leak is coming from? What about the boot that goes around the out drive?
Could that be the issue?
1995 220
Red Rock, IA
Red Rock, IA
Re: Slow leak in boat
The bearing does not leak ....there's a gimbal bearing that needs lubrication and all that is done when the outdrive is serviced (benefit). What areas of your boat are below the waterline? That's were the leak is coming from. Could the boat plug be stripped/loose or some other fitting (seal) below the the waterline, of course it could, but sitting in this chair 90% of the time we think (experience) the leak is coming from the outdrive. Now its your decision. good luck
2004 220
Who is online
Users browsing this forum: No registered users and 5 guests

