Page 1 of 1
Remote control lever
Posted: Thu Sep 23, 2021 1:44 pm
by 1almeida2
Hi.
On a 2007 cobalt 232, to lubricate the remote control lever and mechanism how to do disassembly to gain access.
I must unscrew these two screws. There is some publication, video that teaches.
Thanks
Re: Remote control lever
Posted: Thu Sep 23, 2021 7:30 pm
by SAB220
I see Volvo Penta on the control, If it were me, I think I would go in that direction rather then the Cobalt direction. good luck
Re: Remote control lever
Posted: Fri Sep 24, 2021 12:51 am
by bruceb58
Teleflex makes those for Volvo Penta.
Out of curiosity, what makes you think you need to lubricate the control? 99% of the time, the control is hard to move because of the cables.
Re: Remote control lever
Posted: Fri Sep 24, 2021 12:17 pm
by 1almeida2
Thanks
I planned to lubricate the control and cable connection. Lubrication of cables only if they are removed, right ?
Re: Remote control lever
Posted: Sat Sep 25, 2021 1:10 am
by bruceb58
1almeida2 wrote: Fri Sep 24, 2021 12:17 pm
Thanks
I planned to lubricate the control and cable connection. Lubrication of cables only if they are removed, right ?
You never lubricate the cables. If they don't move freely, you replace them.