Page 1 of 1
Instrumentation screen has power, but gauges don't read
Posted: Fri Jul 10, 2020 9:47 pm
by Caskeycobalt
Got on my boat this evening and the instrumentation screens kicked off just fine. However, the gauges didn't have a reading. (i.e. engine temp, rpm, trim, etc. didn't have any data. Neither did the depth finder. Wonder if it is just a blown fuse. If so, where is that devil so I can check it.
Re: Instrumentation screen has power, but gauges don't read
Posted: Fri Jul 10, 2020 11:04 pm
by AsLan7
.
Hey CC. Welcome to the Cobaltchat forum. So glad you found us!
Circuit breakers are located under the dash. See anything popped?
How about a pic?
Again welcome aboard mate!
.
Re: Instrumentation screen has power, but gauges don't read
Posted: Sat Jul 11, 2020 6:35 am
by Big Block Power
My bad what kind of boat do you have?
The signature line works great for this kind of info and where you are from?
Re: Instrumentation screen has power, but gauges don't read
Posted: Sat Jul 11, 2020 7:47 am
by Caskeycobalt
2017 R30. Lake Texoma... north of Dallas.
Re: Instrumentation screen has power, but gauges don't read
Posted: Tue Sep 22, 2020 10:22 am
by higginspa1371
Happens with my R5. Turn ignition off and restart and that usually works. Not that I should have too
Re: Instrumentation screen has power, but gauges don't read
Posted: Tue Sep 22, 2020 1:10 pm
by tgrace98
Sounds to me like the nema2000 adapter that pulls from the ECU's is acting up. With it being a 2017 I would be taking it to the dealer for a warranty claim.
Re: Instrumentation screen has power, but gauges don't read
Posted: Sat Oct 10, 2020 9:10 am
by Traveller14
I have a 2019 R5 and recently the blower and gauges do not come on for about 2 minutes - usually after I have pulled out of the slip. Has anyone had that issue before. The red light for the blower comes on immediately