Page 1 of 1

Trailer for 232

Posted: Tue Dec 31, 2019 8:05 am
by Tell3131
I am buying a 2008 Cobalt 232. It doesn't come with a trailer, but I need a trailer for it. I am looking for a trailer, but I am unsure as to exact fit for the 232. I have a good idea about length, but just hesitant to buy anything as I am not sure how the bunks will fit to the boat. Any recommendations? I am ok with buying a new trailer too, but figured could save a buck or two if I went with used. I am located in Kansas City MO area, but can travel a bit to get one.

Here is one used trailer I am looking at that had a Yamaha SX240 on it (so about the same size as the 232).

https://loz.craigslist.org/tro/d/sunris ... 21487.html

Re: Trailer for 232

Posted: Tue Dec 31, 2019 8:20 am
by Lockey14s
there are a number of manufacturers you can go to and they can build you a trailer that will fit your 232 perfectly. Heritage is one thats close to you. I would go to your local cobalt dealer and they could order one for you.

If you are going used i would look for something thats adjustable. like a Venture or EZ loader. That trailer you are looking at might be the right length, but the bunks are going to be WAY off. and they are welded on so you cannot adjust them.

Re: Trailer for 232

Posted: Tue Dec 31, 2019 8:42 am
by Big Block Power
This is the bandit. Call the snowman. he will be seeking a R5 see how close that one is. Bow eye to end of bunks. It might be close.

Re: Trailer for 232

Posted: Wed Jan 01, 2020 12:30 am
by Holy Smokes
Call Ed Champion at Big Thunder Marine at Lake the Ozarks
(402) 290-8070

They’re a dealer for B&M Haulrite trailers manufactured right in Camdenton. Likely have the exact hull dimensions for a 232. Solid trailer that can be customized to your specs at a reasonable cost in 2-3 weeks.

Re: Trailer for 232

Posted: Thu Jan 02, 2020 6:49 pm
by thunder550
Go custom new or universal used. I have my '95 252 on a 2008 Venture VBT-5900 and it works well.

Re: Trailer for 232

Posted: Fri Jan 03, 2020 8:28 am
by Tell3131
thunder550 wrote: Thu Jan 02, 2020 6:49 pm Go custom new or universal used. I have my '95 252 on a 2008 Venture VBT-5900 and it works well.
How much did you have to adjust the Venture to fit your 252? I am ok with going used, but having to adjust the trailer makes me nervous as it is all new to me. Thanks.

Re: Trailer for 232

Posted: Fri Jan 03, 2020 12:26 pm
by Big Block Power
Tell3131 wrote: Fri Jan 03, 2020 8:28 am
thunder550 wrote: Thu Jan 02, 2020 6:49 pm Go custom new or universal used. I have my '95 252 on a 2008 Venture VBT-5900 and it works well.
How much did you have to adjust the Venture to fit your 252? I am ok with going used, but having to adjust the trailer makes me nervous as it is all new to me. Thanks.
Well he just adjusted everything that had a nut and a bolt on it. Done in 15 minutes 😂😂🔩

Re: Trailer for 232

Posted: Sat Jan 04, 2020 12:22 am
by akorcovelos
The local marina should be able to set the trailer up for you for pretty cheap. Just make sure it’s bunk style and long enough.

Re: Trailer for 232

Posted: Sat Jan 04, 2020 10:28 pm
by thunder550
Tell3131 wrote: Fri Jan 03, 2020 8:28 am
thunder550 wrote: Thu Jan 02, 2020 6:49 pm Go custom new or universal used. I have my '95 252 on a 2008 Venture VBT-5900 and it works well.
How much did you have to adjust the Venture to fit your 252? I am ok with going used, but having to adjust the trailer makes me nervous as it is all new to me. Thanks.
It wasn't bad. Before putting the boat on the trailer the first time I found out where I wanted the bunks to rest on the hull, measured the hull, then set the bunk width. I think I had to put the boat on the trailer once and then pull it back off and adjust. Once I had the width right, I played with the forward/backward position. Probably did 3-4 rounds of boat on/off to get it exactly where I wanted it by adjusting the location of the winch support. I picked a slow winter day at the lake and took tools with me and did the adjustments on the ramp.

Re: Trailer for 232

Posted: Sun Jan 05, 2020 8:10 pm
by Snowman8
My EZ Loader trailer that was built for an R5 is for sale and will be available in the spring. It is a custom built trailer with 5 aluminum wheels, I just put 4 new Goodyear Marathon load range D tires on last year too. I am not sure of the hull differences between the R5 and the 232 though. The trailer is black in color and in really good shape!

Re: Trailer for 232

Posted: Sun Jan 05, 2020 8:33 pm
by Big Block Power
Snowman8 wrote: Sun Jan 05, 2020 8:10 pm My EZ Loader trailer that was built for an R5 is for sale and will be available in the spring. It is a custom built trailer with 5 aluminum wheels, I just put 4 new Goodyear Marathon load range D tires on last year too. I am not sure of the hull differences between the R5 and the 232 though. The trailer is black in color and in really good shape!
Like I said right away get the tape measure out.

Re: Trailer for 232

Posted: Mon Jan 06, 2020 7:10 pm
by Snowman8
I sent the OP the information on my trailer. Thanks BBP!

Re: Trailer for 232

Posted: Mon Jan 06, 2020 7:59 pm
by Big Block Power
Snowman8 wrote: Mon Jan 06, 2020 7:10 pm I sent the OP the information on my trailer. Thanks BBP!
Yep. Hopefully it's close.