Bimini Screws
Posted: Mon Jun 25, 2018 7:02 pm
1/4-20 X 3/4" Panhead screws for bimini can be found here:
http://www.marinepartdepot.com/ststhesc1.html
http://www.marinepartdepot.com/ststhesc1.html
Page 1 of 1
Re: Bimini Screws
Posted: Mon Jun 25, 2018 7:23 pm
Great you found the exact fit. Cheap insurance to have a dozen I the boat.
Re: Bimini Screws
Posted: Mon Jun 25, 2018 9:04 pm
I ordered 10 @ $ 0.99 Shipping was free.
Re: Bimini Screws
Posted: Tue Jun 26, 2018 9:39 pm
Well this thread was not what I was expecting.
Re: Bimini Screws
Posted: Tue Jun 26, 2018 9:40 pm
Your a dandy.
Re: Bimini Screws
Posted: Thu Jun 28, 2018 8:51 pm
Thunder, what did you expect a topic of “screws” from Driller to be about?
Re: Bimini Screws
Posted: Thu Jun 28, 2018 9:35 pm
What ever it was, I'm pretty sure it needs a fuel filler baffle 
Re: Bimini Screws
Posted: Thu Jun 28, 2018 9:39 pm
Best way to keep the vomit out of boat 
Re: Bimini Screws
Posted: Sat Jun 30, 2018 11:50 am
That's funny, I don't care who you are...
Re: Bimini Screws
Posted: Tue Sep 04, 2018 7:07 pm
If I remember Driller posted this link for replacement pins for the Bimini top
https://greatlakesskipper.com/boat-bimi ... less-steel
Does anyone have any good instructions and/or videos to show how to install the replacements? They come from Cobalt attached by rivets and I am guessing you have to drill them out. This is new territory for me so any suggestions will be most appreciated.
https://greatlakesskipper.com/boat-bimi ... less-steel
Does anyone have any good instructions and/or videos to show how to install the replacements? They come from Cobalt attached by rivets and I am guessing you have to drill them out. This is new territory for me so any suggestions will be most appreciated.
Re: Bimini Screws
Posted: Tue Sep 04, 2018 11:02 pm
I replaced all the lanyards on my pins last year.Bobo87 wrote: Tue Sep 04, 2018 7:07 pm If I remember Driller posted this link for replacement pins for the Bimini top
https://greatlakesskipper.com/boat-bimi ... less-steel
Does anyone have any good instructions and/or videos to show how to install the replacements? They come from Cobalt attached by rivets and I am guessing you have to drill them out. This is new territory for me so any suggestions will be most appreciated.
What I did was use a center punch to drive the center of the rivet out. Then drilled out the rivet. For install I got some stainless steel rivets.
Re: Bimini Screws
Posted: Wed Sep 05, 2018 6:37 am
Bfun did you use a rivet gun to install the new rivets?
Re: Bimini Screws
Posted: Wed Sep 05, 2018 10:52 am
Yes I did. This is what I used.
Re: Bimini Screws
Posted: Mon Jun 03, 2024 8:02 am
Bfun220
have 2100 232 lanyards for bimini clips breaking need to replace. Read your post. can you give more detail on the source for the rivets you used. Want to keep boat as close to factory as possible.
"THanks
have 2100 232 lanyards for bimini clips breaking need to replace. Read your post. can you give more detail on the source for the rivets you used. Want to keep boat as close to factory as possible.
"THanks
Re: Bimini Screws
Posted: Mon Jun 03, 2024 8:03 am
oops.... 2011