Page 46 of 65

Re: Let's see your Tow rigs with your boat!

Posted: Sat Sep 05, 2020 11:50 am
by Dudley67
66821199-0043-4FA4-8F98-8DE50256C05F.jpeg
Recent vehicle swap, sold the F150 to family, located a sweet Avalanche 4wd LTZ. 8-)

Re: Let's see your Tow rigs with your boat!

Posted: Sat Sep 05, 2020 9:46 pm
by Snowman8
2019 Ford F-150 3.5 eco boost max tow pulling a 2014 R5 on a 2020 Loadmaster trailer. This truck handles the boat like it isn’t even there. The trailer is hands down the nicest trailer I have ever pulled!

Re: Let's see your Tow rigs with your boat!

Posted: Sun Sep 06, 2020 5:03 am
by Tuscany
2020 F-350 Limited 6.7L 10 speed
1,050 lbs. of torque and drives like a dream.
Towing is a joke.

I just picked up a two piece set of flaps that mount/slide inside of the open sides of the hitch.
www.livelymachine.com

Re: Let's see your Tow rigs with your boat!

Posted: Sun Sep 06, 2020 8:22 am
by AsLan7
.
Nice T!👍🏻

Re: Let's see your Tow rigs with your boat!

Posted: Mon Sep 07, 2020 8:01 pm
by Snowman8
Tuscany wrote: Sun Sep 06, 2020 5:03 am 2020 F-350 Limited 6.7L 10 speed
1,050 lbs. of torque and drives like a dream.
Towing is a joke.

I just picked up a two piece set of flaps that mount/slide inside of the open sides of the hitch.
www.livelymachine.com

Hey T, have you been using the receiver mounted flaps very long? I’m curious because quite a few years ago I ran receiver mounted flaps that were like a long bristled brush. After one year the front edges of my trailer and axels looked like they were sand blasted. They didn’t drag on the ground either, probably 3 or so inches off the ground. It maybe kept the rocks from hitting the trailer & boat but it kicked up enough sand and fine debris to sand blast my trailer. I sold the thing on Craigslist after a year. I’m curious if the solid flaps do the same?

Re: Let's see your Tow rigs with your boat!

Posted: Mon Sep 07, 2020 8:49 pm
by dustinm
Snowman8 wrote: Mon Sep 07, 2020 8:01 pm
Tuscany wrote: Sun Sep 06, 2020 5:03 am 2020 F-350 Limited 6.7L 10 speed
1,050 lbs. of torque and drives like a dream.
Towing is a joke.

I just picked up a two piece set of flaps that mount/slide inside of the open sides of the hitch.
www.livelymachine.com

Hey T, have you been using the receiver mounted flaps very long? I’m curious because quite a few years ago I ran receiver mounted flaps that were like a long bristled brush. After one year the front edges of my trailer and axels looked like they were sand blasted. They didn’t drag on the ground either, probably 3 or so inches off the ground. It maybe kept the rocks from hitting the trailer & boat but it kicked up enough sand and fine debris to sand blast my trailer. I sold the thing on Craigslist after a year. I’m curious if the solid flaps do the same?
Well shoot I was just about to get the brooms to save our new boat. Our old 220 was trailer-ed all over by the previous owners and it had a considerable amount of rock chips on the hull sides. So what do I need to save the new one? We plan on going everywhere with this new boat.

Re: Let's see your Tow rigs with your boat!

Posted: Tue Sep 08, 2020 8:06 pm
by Jeeper
9A982C95-FCC9-4D53-AC67-7B648DF22020.jpeg
dustinm wrote: Mon Sep 07, 2020 8:49 pm
Snowman8 wrote: Mon Sep 07, 2020 8:01 pm
Tuscany wrote: Sun Sep 06, 2020 5:03 am 2020 F-350 Limited 6.7L 10 speed
1,050 lbs. of torque and drives like a dream.
Towing is a joke.

I just picked up a two piece set of flaps that mount/slide inside of the open sides of the hitch.
www.livelymachine.com

Hey T, have you been using the receiver mounted flaps very long? I’m curious because quite a few years ago I ran receiver mounted flaps that were like a long bristled brush. After one year the front edges of my trailer and axels looked like they were sand blasted. They didn’t drag on the ground either, probably 3 or so inches off the ground. It maybe kept the rocks from hitting the trailer & boat but it kicked up enough sand and fine debris to sand blast my trailer. I sold the thing on Craigslist after a year. I’m curious if the solid flaps do the same?
Well shoot I was just about to get the brooms to save our new boat. Our old 220 was trailer-ed all over by the previous owners and it had a considerable amount of rock chips on the hull sides. So what do I need to save the new one? We plan on going everywhere with this new boat.
I’ve used the Rock Star mud flap every time I have pulled me R5 since it was new. Probably have 5K miles towing and haven’t found any rock chips on the boat or trailer yet. The only issue I’ve had is someone caught it with their boat trailer and bent it at Lake Powell. There was shattered tail light parts laying on the ground by my truck. One thing I like about the Rock Star is that it doesn’t get in the way of the backup sensors.

Re: Let's see your Tow rigs with your boat!

Posted: Wed Sep 09, 2020 6:40 am
by Tuscany
Snowman8 wrote: Mon Sep 07, 2020 8:01 pm
Tuscany wrote: Sun Sep 06, 2020 5:03 am 2020 F-350 Limited 6.7L 10 speed
1,050 lbs. of torque and drives like a dream.
Towing is a joke.

I just picked up a two piece set of flaps that mount/slide inside of the open sides of the hitch.
www.livelymachine.com

Hey T, have you been using the receiver mounted flaps very long? I’m curious because quite a few years ago I ran receiver mounted flaps that were like a long bristled brush. After one year the front edges of my trailer and axels looked like they were sand blasted. They didn’t drag on the ground either, probably 3 or so inches off the ground. It maybe kept the rocks from hitting the trailer & boat but it kicked up enough sand and fine debris to sand blast my trailer. I sold the thing on Craigslist after a year. I’m curious if the solid flaps do the same?
Hmmm. My guess is that the issue is fine road grit getting stirred up from the stiffer brush/flaps blocking air flow. That’s a potential problem..i’ll keep an eye on that. Thanks for the heads up. I never considered that possibility.

My flaps are softer rubber so they do sail, and hopefully don’t kick up the grit, but it could still happen. They are usually 3-4” off the ground at highway speed. Hopefully it’s enough to stop crap from hitting the hull and trailer fenders, but not enough to kick up the fine stuff.

Re: Let's see your Tow rigs with your boat!

Posted: Wed Sep 09, 2020 10:47 am
by dustinm
Some pretty good tips here on flaps/brooms. My wife ran across a set of used brooms for a quarter of new price. After checking out towtector website I found that the bottom needs to be about 3-4 inches off the ground. This may be the sweet spot for them and flaps to knock down rocks and not sweep the ground. While I dont want rock blasting on anything I would rather the trailer take the hit instead of the boat.

This is probably one of those cases where if you do something to protect the boat its better than nothing.

Re: Let's see your Tow rigs with your boat!

Posted: Wed Sep 09, 2020 12:29 pm
by ourlee
My shipper (and friend) runs a 6.0 gas Chevy I just got this an hour ago. SO PUMPED
8CD0D87F-B344-4FD7-97A7-42FB93442589.jpeg

Re: Let's see your Tow rigs with your boat!

Posted: Wed Sep 09, 2020 12:33 pm
by Big Block Power
Yea! now tell him to get a diff ball rise in that thing so the trailer isn't dragging on the grd.

Re: Let's see your Tow rigs with your boat!

Posted: Wed Sep 09, 2020 12:56 pm
by ourlee
:mrgreen: I’ll pass that along tomorrow. Today I’m finishing my 30 pack

Re: Let's see your Tow rigs with your boat!

Posted: Wed Sep 09, 2020 1:11 pm
by dustinm
I hope those aren't torsion axles or you'll have problems

Re: Let's see your Tow rigs with your boat!

Posted: Wed Sep 09, 2020 4:23 pm
by ourlee
Never thought to ask. We drive a mile to the lake. Put the boat in. End of season we load her up, drive her home wrapped, store her on the property. Repeat. We don’t even have a tow vehicle :D
It is brand new and made it without any drama from fla to NJ. It’s next big trip will be in three years when we move to Dewey Beach.
What kind of problems can I expect? It’s my first boat.

Re: Let's see your Tow rigs with your boat!

Posted: Thu Sep 10, 2020 7:44 am
by Tuscany
dustinm wrote: Wed Sep 09, 2020 1:11 pm I hope those aren't torsion axles or you'll have problems
Truth.
Torsion axles are totally out for any future trailers I buy.
I have two out of five trailers with, and if you aren’t sitting totally level, expect tire issues.