Page 2 of 2
Re: Oil Change Save some Money
Posted: Fri Nov 22, 2024 6:56 pm
by bruceb58
sailor55330 wrote: Fri Nov 22, 2024 2:43 pm
bruceb58 wrote: Thu Nov 21, 2024 7:09 pm
sailor55330 wrote: Tue Nov 19, 2024 11:31 am
100% agree. These new engines make winterization and oil changes a breeze. One tip I will offer- I have a 2016 5.3 and the vacuum pump from west marine. That particular pump uses a 1/4" hose that goes down the center of the dipstick tube (yes it's slow). THe tube that comes with the pump is not long enough to reach the bottom of the oil pan. You can get 1/4" plastic tubing from Home Depot for about $6. I bought 25ft and just throw away the used tube each year and cut a new piece.
Why don't you screw into the top of the dipstick tube instead of using the small diameter tube down the dipstick? Makes it probably 5 times easier.
My oil extractor doesnn't have that attachment. If it did I would. The West Marine only comes with 1/4 and 3/16 options. I didn't realize it at the time of purchase
I am sure it would be easy to add. Have a link to the pump you bought?
Re: Oil Change Save some Money
Posted: Fri Nov 22, 2024 7:57 pm
by sailor55330
Re: Oil Change Save some Money
Posted: Sat Nov 23, 2024 12:08 am
by bruceb58
Almost looks like you could attach some clear tubing to the top of the unit and then run that to a garden hose adapter. Would use hose clamps on each end so it wouldn't leak.
Something like this might work depending on hose diameter.
Trust me, you will get tired of trying to suck oil through that tiny hose.
www.amazon.com/Anderson-Metals-Garden-F ... X0DER&th=1
Re: Oil Change Save some Money
Posted: Mon Nov 25, 2024 3:57 pm
by sailor55330
I agree it's not fun, but honestly, I'm still limited to the size of the dipstick tube. It's not that much different. If 1/4" fits down it, then it can't be more than 3/16' ID. What I am really gaining? Plus, I would have to re-engineer the fitting on top of the pump. As is it does it in about 15 mins. Pump and walk away.
Re: Oil Change Save some Money
Posted: Mon Nov 25, 2024 10:39 pm
by bruceb58
sailor55330 wrote: Mon Nov 25, 2024 3:57 pm
I agree it's not fun, but honestly, I'm still limited to the size of the dipstick tube. It's not that much different. If 1/4" fits down it, then it can't be more than 3/16' ID. What I am really gaining? Plus, I would have to re-engineer the fitting on top of the pump. As is it does it in about 15 mins. Pump and walk away.
The dipstick tube itself is huge compared to the tiny tube you slide into it. If it works for you...great! I have see people fight with the small tubes if they fail to get the oil VERY warm!
Just wanted to make sure you didn't have a better option with the pump you have.
Re: Oil Change Save some Money
Posted: Tue Nov 26, 2024 8:25 am
by jhnmdahl
bruceb58 wrote: Sat Nov 23, 2024 12:08 am
Almost looks like you could attach some clear tubing to the top of the unit and then run that to a garden hose adapter. Would use hose clamps on each end so it wouldn't leak.
Something like this might work depending on hose diameter.
Trust me, you will get tired of trying to suck oil through that tiny hose.
www.amazon.com/Anderson-Metals-Garden-F ... B006PKMU7U
I bought that exact thing, according to Amazon, back when I first did my oil change, but the Marpac Fluid Xtractor (non-West branded version of the same thing) came with a garden hose end for one of the hoses so I didn't need it. See here for an old pic:
viewtopic.php?p=9389
It still wasn't fast due to the oil not being warm and the hose being small, but as sailor says, you can pump it to draw a vacuum and walk away so speed isn't particularly critical.
John