Cobaltchat.com

Thanks for the replies. May end up trying this.

Dub

Just received OEM Pole and locking flush mount. Total 112.50. SeaLux Marine Products. Good Luck

I originally mounted mine to an old all-around light pole that I had in my dock locker too, but it flapped so hard at speed that I got worried about the socket pins, so I just clipped it to the bimini stanchion with Charlevoix Flag Clips and added tie wraps on the back side to secure them a bit more than the interlocking teeth alone. Sometimes I have to readjust the clips and it gets twisted around on occasion, probably due to the fact that it's angled forward and/or because the clips don't swivel, but it "works for me".
. G

higginspa1371 wrote: Sun Apr 07, 2019 4:39 pm Just received OEM Pole and locking flush mount. Total 112.50. SeaLux Marine Products. Good Luck

.
Hey hp1371, welcome to the CobaltChat forum.
Are you able to post a pic of your OEM flush mount installation? Plus, we would love to see your Cobalt.
Feel free to start a new intro thread if you have the time. Regardless, so glad you found us. ....and welcome aboard mate!

.

AsLan7 wrote: Sun Apr 07, 2019 10:33 pm

higginspa1371 wrote: Sun Apr 07, 2019 4:39 pm Just received OEM Pole and locking flush mount. Total 112.50. SeaLux Marine Products. Good Luck

.
Hey hp1371, welcome to the CobaltChat forum.
Are you able to post a pic of your OEM flush mount installation? Plus, we would love to see your Cobalt.
Feel free to start a new intro thread if you have the time. Regardless, so glad you found us. ....and welcome aboard mate!

.

Hi Guys,
I was wondering if the flag kit Higgy bought is the one TIG TECH sells, which we've heard was the OEM one Cobalt installed. I'm thinking of adding a second flag pole to mean bean so I have one for ole glory and one for our club burgee. I'll admit, I'm a little nervous to drill the port side gunnel though!

samuri33 wrote: Mon Apr 08, 2019 2:10 pm

AsLan7 wrote: Sun Apr 07, 2019 10:33 pm

higginspa1371 wrote: Sun Apr 07, 2019 4:39 pm Just received OEM Pole and locking flush mount. Total 112.50. SeaLux Marine Products. Good Luck

.
Hey hp1371, welcome to the CobaltChat forum.
Are you able to post a pic of your OEM flush mount installation? Plus, we would love to see your Cobalt.
Feel free to start a new intro thread if you have the time. Regardless, so glad you found us. ....and welcome aboard mate!

.

Hi Guys,
I was wondering if the flag kit Higgy bought is the one TIG TECH sells, which we've heard was the OEM one Cobalt installed. I'm thinking of adding a second flag pole to mean bean so I have one for ole glory and one for our club burgee. I'll admit, I'm a little nervous to drill the port side gunnel though!

No that is not the tig one you prob want.

samuri33 wrote: Mon Apr 08, 2019 2:10 pm

AsLan7 wrote: Sun Apr 07, 2019 10:33 pm

higginspa1371 wrote: Sun Apr 07, 2019 4:39 pm Just received OEM Pole and locking flush mount. Total 112.50. SeaLux Marine Products. Good Luck

.
Hey hp1371, welcome to the CobaltChat forum.
Are you able to post a pic of your OEM flush mount installation? Plus, we would love to see your Cobalt.
Feel free to start a new intro thread if you have the time. Regardless, so glad you found us. ....and welcome aboard mate!

.

Hi Guys,
I was wondering if the flag kit Higgy bought is the one TIG TECH sells, which we've heard was the OEM one Cobalt installed. I'm thinking of adding a second flag pole to mean bean so I have one for ole glory and one for our club burgee. I'll admit, I'm a little nervous to drill the port side gunnel though!

Isn't your potable water fill on the port side S33?

AsLan7 wrote: Mon Apr 08, 2019 2:17 pm

samuri33 wrote: Mon Apr 08, 2019 2:10 pm

AsLan7 wrote: Sun Apr 07, 2019 10:33 pm

.
Hey hp1371, welcome to the CobaltChat forum.
Are you able to post a pic of your OEM flush mount installation? Plus, we would love to see your Cobalt.
Feel free to start a new intro thread if you have the time. Regardless, so glad you found us. ....and welcome aboard mate!

.

Hi Guys,
I was wondering if the flag kit Higgy bought is the one TIG TECH sells, which we've heard was the OEM one Cobalt installed. I'm thinking of adding a second flag pole to mean bean so I have one for ole glory and one for our club burgee. I'll admit, I'm a little nervous to drill the port side gunnel though!

Isn't your potable water fill on the port side S33?

Haha, you know better than I A7, I haven't seen my girl since January, and only saw her once before that! So I'm not familiar what's over there to avoid to add another flag pole.

samuri33 wrote: Mon Apr 08, 2019 2:40 pm

AsLan7 wrote: Mon Apr 08, 2019 2:17 pm

samuri33 wrote: Mon Apr 08, 2019 2:10 pm

Hi Guys,
I was wondering if the flag kit Higgy bought is the one TIG TECH sells, which we've heard was the OEM one Cobalt installed. I'm thinking of adding a second flag pole to mean bean so I have one for ole glory and one for our club burgee. I'll admit, I'm a little nervous to drill the port side gunnel though!

Isn't your potable water fill on the port side S33?

Haha, you know better than I A7, I haven't seen my girl since January, and only saw her once before that! So I'm not familiar what's over there to avoid to add another flag pole.

I'm sure slideracer can make a flagpole cover. Lol

samuri33 wrote: Mon Apr 08, 2019 2:40 pm

AsLan7 wrote: Mon Apr 08, 2019 2:17 pm

samuri33 wrote: Mon Apr 08, 2019 2:10 pm

Hi Guys,
I was wondering if the flag kit Higgy bought is the one TIG TECH sells, which we've heard was the OEM one Cobalt installed. I'm thinking of adding a second flag pole to mean bean so I have one for ole glory and one for our club burgee. I'll admit, I'm a little nervous to drill the port side gunnel though!

Isn't your potable water fill on the port side S33?

Haha, you know better than I A7, I haven't seen my girl since January, and only saw her once before that! So I'm not familiar what's over there to avoid to add another flag pole.

.
Well everything can be modified.....just takes time and money.
.