Cobaltchat.com

SR if you haven't already you need to add a dimmer to your bow LEDs or a switch to turn them off completely. Otherwise you can't see a thing when you're motoring across the lake. My wet sounds remote will dim them down pretty low, and I'm sure your little gadget will do the same thing,

Those look awesome, and I continue to be impressed with your work. It makes me wonder what you did with your time before you bought a boat.

Yes, I'll have both. The led controller is bluetooth controlled via my phone to change cokor and brightness, but on Winnipesaukee, we are not allowed to run the leds while underway so I'm tying the controller power to one of the accessory switches to turn it on and off. The controller remembers its last color setting on power off, which is nice.

slideruleracer wrote: Fri May 18, 2018 9:11 am Hi BB,
The material is Di-Noc from 3m. I bought the version called "Rosewood" off ebay. They make hundreds of different designs.

https://www.ebay.com/itm/3M-DI-NOC-ROSE ... xYafWVXgiw

Nice I don't need any but was just wondering for the just in case time.

slideruleracer wrote: Fri May 18, 2018 12:33 pm Yes, I'll have both. The led controller is bluetooth controlled via my phone to change cokor and brightness, I'm tying the controller power to one of the accessory switches to turn it on and off. The controller remembers its last color setting on power off, which is nice.

This is how I installed mine also.

What a chronology of boat restoration! I am hooked! This is very impressive! More! More! More!

Ytmsn wrote: Fri May 18, 2018 11:45 am It makes me wonder what you did with your time before you bought a boat.

Lol!....this. building space rockets maybe? Iron man suits? The real life tony stark. Say hi to pepper for me.

Seriously though your skills are sick. Maybe you should just build a custom boat from scratch

Table Rockin wrote: Sat May 19, 2018 10:24 am

Ytmsn wrote: Fri May 18, 2018 11:45 am It makes me wonder what you did with your time before you bought a boat.

Lol!....this. building space rockets maybe? Iron man suits? The real life tony stark. Say hi to pepper for me.

Seriously though your skills are sick. Maybe you should just build a custom boat from scratch

My wife said hook her up with Thor!

Big Block Power wrote: Sat May 19, 2018 10:45 am My wife said hook her up with Thor!

Ha! Our wives are 2 peas in a pod, apparently.

While I'm flattered by the Tony Stark comparison, in reality I'm probably more like Tim "Tool-man" Taylor. Ha!

Dont be humble slide. Id like to commission an iron suit. Ill pay...fine it doesnt have to fly...but it must have lasers. Frieking laser beams!

Done by end of summer?

Some progress today. I cut all the new metal and replacement wood pieces for the swim platform, cemented the radio insert into the glove box and faired it out, added the woodgrain wrap to the port switch panel and started putting the new electrical 'panel' parts together. Here's some pics...

More pics...

Can you post a picture of the fox marine gateway and wiring of it. I just want to use my phone so not sure how much extra wiring I need. Thanks ahead of time.

Hey BB, hopefully this illustration helps out.

slideruleracer wrote: Mon May 28, 2018 8:49 am Hey BB, hopefully this illustration helps out.

I contacted them ti see what they say. I would think i could bypass the bus all together seeing that I'm only going to use a app. Thanks though.

Did you see on ebay there are some windless stainless for sale that might work for you. Google cobalt boat parts and maybe add windlass. If you can't find them I'll get you the item numbers.

I did see those parts. Got to research the 293 windlass design and see how close it resembles a modern R7 windlass.

Ok, some updates...
The electric panel is done and I now have power to everything. At first I thought I screwed up the switch panel wiring that I mucked with but then discovered that the battery power to the ignition switch comes from the battery connection at the engine - which still isn't installed! So, after rigging up a connection to the battery, all was good until I tested my auxiliary water pump switch that I thought I had connected to the head aux switch. I pulled the head breaker panel out and discovered that a previous owner had modified the wiring in the panel to completely bypass all 3 breakers as all 3 of them had failed. Yikes! So now, that is getting wrapped in rosewood and updated with new hardware. I'm also replacing the head courtesy light with a modern Led unit while I'm at it.

Speaking of lights, the engine compartment lights had corroded, so I replaced those with little led spotlights as well... I'm thinking of trying to rig those to a mercury switch on the engine hatch so that they only turn on when the hatch is up..