Trailering legs for bimini top

[CD262]

Anyone have leads on a set of trailering legs for a bimini top? I have a 2011 262 so I have the 7 year challenge on parts. Not sure who made the tops or how hard it would be to either purchase a set or have a set fabbed up. I've seen a few photos of them here and there, apparently they were an option which the original owner of this boat didn't opt for. Most that I have seen are "s" shaped, and have the quick release end where the normal bimini top attaches.

Naturally, my storage unit is about 6-8" too short to get the boat in with the bimini up and I hate laying the it down as it doesn't sit quite flat and is always resting on the gel coat. I use pool noodles around the poles but I would still like a better option.

Any advice from the crew here would be appreciated as always!

[Big Block Power]

You can always get them made at Marine upholstery shop. Maybe A7 can find a link to some on the web. I've seen them. You may just have to add the hardware to your boat.

[AsLan7]

.
I'm not sure what trailerling legs are Cd262. Those were not an option on the 2000-2007 262 series models. Post a pic of one that you have seen.

[CD262]

This is what I am referring to...

[AsLan7]

.
Ahh. Roger that. Never seen those before. Not an option on the 2000-2007 run 262/263 models.

[Dudley67]

Not sure, but take a look here to order a custom length. I ordered shorty poles for dri rack storage for my 07 252 in Florida. They were thru a Cobalt dealer, but these are comparable.

https://store.canvas-boat-cover-and-rep ... ba1023.htm

[Acnull]

Very hard to make. I tried to make some custom poles for my boat as well. I found out the S share is required for the existing hardware to line up.

[CD262]

Very hard to make. I tried to make some custom poles for my boat as well. I found out the S share is required for the existing hardware to line up.

I was afraid of that!!!