Captains Call pricing... what’s a reasonable range?
-
dirtydozen13
- Ensign

- Posts: 5
- Joined: Tue Jun 25, 2019 6:01 pm
- Location: Lake Tahoe
- Contact:
Captains Call pricing... what’s a reasonable range?
I just got a quote of 10 hrs (@145/hr) plus $2700 for parts to install a Corsa exhaust on my 2001 246 with a Merc 7.4. Am I crazy in thinking that’s hella expensive?
What have others paid in here for their aftermarket CC’s?
What have others paid in here for their aftermarket CC’s?
-
Southerncomfort
- Commander

- Posts: 53
- Joined: Thu Feb 14, 2019 11:55 pm
- Location: Franklin, TN
- Contact:
Re: Captains Call pricing... what’s a reasonable range?
Don't know if that is expensive or not... but it is worth it.


2011 Cobalt 296
Twin Volvo 8.1 GXi
Twin Volvo 8.1 GXi
-
Norris_Boating
- Captain

- Posts: 473
- Joined: Sat May 19, 2018 7:19 am
- Location: Tennessee
- Contact:
Re: Captains Call pricing... what’s a reasonable range?
No idea if that is a good price, but USUALLY you get what you pay for, see if you can find a competitive quote and get references. This should be a difficult install and if it isn't done correctly could cause serious problems. This isn't just a radio install for example.
I would have pegged the labor around $90-$100 an hour but it depends on what part of the country you are in.
Check out their dealer locator for a different bid.
http://corsamarine.com/store-locator.aspx
I would have pegged the labor around $90-$100 an hour but it depends on what part of the country you are in.
Check out their dealer locator for a different bid.
http://corsamarine.com/store-locator.aspx
2016 220
2019 R7 Surf
White and Red V8-380CE EVC DP (FWD) - 380 hp
2019 R7 Surf
White and Red V8-380CE EVC DP (FWD) - 380 hp
Re: Captains Call pricing... what’s a reasonable range?
$145 an hour is crazy high, but I think what they are doing is either bidding the job super high because in reality they really dont want to do it and hope you'll go away to someone else, or...
padding the bid in the event it takes longer than 10 hours..
I would ask them how many times the shop has done it in the past. Also, is the tech the same guy ( highly doubtful)
And regardless of who does it, I'd get a written guarantee as to who is responsible and covers the cost of a screwup. You'll only get one shot at this. Once the holes are cut, they can't be moved! I would be pretty nervous of ANYone, regardless their level of experience and expertise cutting holes in my transom.
Me? I'd buy a different boat with CC if I wanted it that bad. But that's me.
Have you called Corsa to price just what the components will cost? I'm thinking A7 had his 263 done for somewhere around $3500. And Shrffdeputy had his 252 done last summer for about the same amount ( I think..). Hopefully they'll jump in, but both are on vacation this week!
padding the bid in the event it takes longer than 10 hours..
I would ask them how many times the shop has done it in the past. Also, is the tech the same guy ( highly doubtful)
And regardless of who does it, I'd get a written guarantee as to who is responsible and covers the cost of a screwup. You'll only get one shot at this. Once the holes are cut, they can't be moved! I would be pretty nervous of ANYone, regardless their level of experience and expertise cutting holes in my transom.
Me? I'd buy a different boat with CC if I wanted it that bad. But that's me.
Have you called Corsa to price just what the components will cost? I'm thinking A7 had his 263 done for somewhere around $3500. And Shrffdeputy had his 252 done last summer for about the same amount ( I think..). Hopefully they'll jump in, but both are on vacation this week!
2001 262 502 GXI (because it sounds better than an 8.2)
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
From the Land of the Red Man
"Black Boats Matter"
#FARCON Marine / CC Core!
Re: Captains Call pricing... what’s a reasonable range?
I'm in the camp where is it's a job using a saw, and if it involves the transom, it needs to be done by the factory. I won't let my dealer install underwater lights. Not because I don't trust them...but I don't trust anybody with the safety of my boat. We can get far away from shore.....
The only way I would install a CC would to be by ordering a new boat.
That's just my opinion. I'm sure others have had good luck with an aftermarket install, but it's just not in my DNA to let Joe Schmoe cut my boat.
The only way I would install a CC would to be by ordering a new boat.
That's just my opinion. I'm sure others have had good luck with an aftermarket install, but it's just not in my DNA to let Joe Schmoe cut my boat.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
- Big Block Power
- Fleet Admiral

- Posts: 17930
- Joined: Sat May 07, 2016 8:05 pm
- Location: Neenah,Wi
- Contact:
Re: Captains Call pricing... what’s a reasonable range?
I got a great deal on ebay on a new set up. I'm going to sell the tips Because they are not the ones I want. I'm so mine myself. And Matt is flying in for lemonade support. Would I pay 3k no way. I'll have a grand into mine. Watch for the deal.
03Cobalt220 8.1gxi DP
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
"Kids in Tow2"
"Pot The Jus" Originator :-)
Neenah Wi
#ItsBu'sfault
#FARCON Marine CC Core!
Re: Captains Call pricing... what’s a reasonable range?
I contacted Corsa directly and the price for my 2008 222 with a 6.2 was $2150 shipped. They use 3M 4200 sealant on the exposed core of the boat after drilling the holes to seal it back up. The sales guy sent me all the diagrams with measurements and instructions, I'm going to do it myself. I don't think it's for the average handy man though lol I used my mill and made an aluminum collar with a hole cut in it same diameter as the hole saw, but I made the hole on the correct angle so I can hold the collar flat against the boat and start the hole on the correct angle. It isn't a straight through hole....
2008 Cobalt 222, 6.2L
Hail Mary
Smith Lake, AL
Hail Mary
Smith Lake, AL
- Patriot 8713
- Commander

- Posts: 85
- Joined: Mon Sep 17, 2018 9:36 am
- Location: Lake of the Ozarks
- Contact:
Re: Captains Call pricing... what’s a reasonable range?
I paid $3,327 for parts and labor for captains call to be installed. Hardin Marine had the best price by far (pic included). I had a local marina do the install.
You do not have the required permissions to view the files attached to this post.
2005 Cobalt 282
496 HO - Bravo III
Lake of the Ozarks, MO 21MM
496 HO - Bravo III
Lake of the Ozarks, MO 21MM
Re: Captains Call pricing... what’s a reasonable range?
OK, a little re-write here...Big Block Power wrote: Wed Jul 24, 2019 7:40 am I got a great deal on ebay on a new set up. I'm going to sell the tips Because they are not the ones I want. I'm so mine myself. And Matt is flying in for lemonade support. Would I pay 3k no way. I'll have a grand into mine. Watch for the deal.
These two guys could take a saw to my boat anytime, and I would not think twice.
I would do my part, which would be trying to perfect the lemonade
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
Re: Captains Call pricing... what’s a reasonable range?
Can someone explain the benefit of this exhaust system?
2019 Cobalt R3 - V8/350 - Ebony Hull w/ Knock Out Red Edge Stripe
Re: Captains Call pricing... what’s a reasonable range?
It simply raises the exhaust outlets above the water line for sound. No performance advantages.
2017 Cobalt R7
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
"Cobalt" Blue
6.2L VP 380 or 430
#FARCON Marine
Re: Captains Call pricing... what’s a reasonable range?
I guess I'm in the minority, but I don't like these systems. There are two boats (non Cobalts) in our marina that have these systems. We were out in a bay about 3/4 mile from the breakwater exit of our marina last Sunday evening listening to music and talking when one of them came out onto the lake and headed past the bay at full tilt and continued south. the sound was so loud, I couldn't believe it is allowed. We were able to hear the loud exhaust long after we could no longer see the boat.
I was just thinking that there is nothing that destroys the tranquility and relaxation of floating on anchor on a quiet evening than a boat roaring by with a CC system. I'd never own one.
2019 Cobalt R3 - V8/350 - Ebony Hull w/ Knock Out Red Edge Stripe
- BigGib
- Captain

- Posts: 268
- Joined: Wed Apr 17, 2019 9:11 am
- Location: Osage Beach / Wentzville, MO
- Contact:
Re: Captains Call pricing... what’s a reasonable range?
It's all personal taste. That's the beauty of the Corsa system is you can still divert it through the prop for quiet exhaust at the push of a switch. I had an IMP 310 Viper with just straight thru hull exhaust and it sounded awesome, but there were times I wish I had Silent Choice. It's a pretty common sound at LOTO and 99% of the time I'm all for itBobRae99 wrote: Wed Jul 24, 2019 12:35 pmI guess I'm in the minority, but I don't like these systems. There are two boats (non Cobalts) in our marina that have these systems. We were out in a bay about 3/4 mile from the breakwater exit of our marina last Sunday evening listening to music and talking when one of them came out onto the lake and headed past the bay at full tilt and continued south. the sound was so loud, I couldn't believe it is allowed. We were able to hear the loud exhaust long after we could no longer see the boat.
I was just thinking that there is nothing that destroys the tranquility and relaxation of floating on anchor on a quiet evening than a boat roaring by with a CC system. I'd never own one.
2008 Cobalt 302 5.7GXI's
"Meant to Be"
Wentzville, MO
Lake of the Ozarks
"Meant to Be"
Wentzville, MO
Lake of the Ozarks
- AsLan7
- Fleet Admiral

- Posts: 11458
- Joined: Sat Jul 29, 2017 10:58 am
- Location: Erie PA
- Been thanked: 1 time
- Contact:
Re: Captains Call pricing... what’s a reasonable range?
.dirtydozen13 wrote: Tue Jul 23, 2019 5:43 pm I just got a quote of 10 hrs (@145/hr) plus $2700 for parts to install a Corsa exhaust on my 2001 246 with a Merc 7.4. Am I crazy in thinking that’s hella expensive?
What have others paid in here for their aftermarket CC’s?
May be able to find some info here too, dd13.
.
2002 Cobalt 262
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
&
2005 Cobalt 263
496 MagHO
(sold )
Erie, PA
Currently boatless (for now)
will fly for food
(CChat moderator)
- NautiGirl
- Vice Admiral

- Posts: 2842
- Joined: Thu Jul 06, 2017 8:10 pm
- Location: Kentucky
- Been thanked: 1 time
- Contact:
Re: Captains Call pricing... what’s a reasonable range?
Pure Joy and happiness.
That is the benefit.
JEFF & KATIE
TeamNAUTI
Ebony Black 2017 R5 8.2 Big Block
CANDIED RED 2007 222 6.2L Merc - Sold
1997 190 4.3 Volvo - Peak Cobalt Design and Manufacturing
KENTUCKY
"Pudgy the had down harder!"
TeamNAUTI
Ebony Black 2017 R5 8.2 Big Block
CANDIED RED 2007 222 6.2L Merc - Sold
1997 190 4.3 Volvo - Peak Cobalt Design and Manufacturing
KENTUCKY
"Pudgy the had down harder!"
Who is online
Users browsing this forum: No registered users and 21 guests
